ORDERS (46 / 44)

Check identifier 17128 — Complaint about a configuration

Check identifier 17128 · EDIFACT message type ORDERS · Format version 202604

Data structure

Structure (BO4E)	Description	Format	17128	Condition
stammdaten	—	object	May	—
AD_HOC_STEUERKANAL [ ]	—	object[]	May	—
konfigurationsprodukt 00010	konfigurationsprodukt	string	X	—
LEISTUNGSKURVENDEFINITION [ ]	—	object[]	May	—
leistungskurven [ ]	—	object[]	May	—
code 00020	Code of the power curve	string	X	—
konfigurationsprodukt 00030	Configuration product	string	X	—
REKLAMATION [ ]	—	object[]	May	—
reklamationsgrund 00040	This specifies the reason for the complaint about values.	Enum Reklamationsgrund	Must	—
`WERTE_ZU_HOCH`	—	—	Must	—
`WERTE_ZU_NIEDRIG`	—	—	Must	—
`WERTE_FEHLEN`	—	—	Must	—
`KONFIGURATION_WIRKT_NICHT`	—	—	Must	—
`KONFIGURATION_WIRKT_TEILWEISE`	—	—	Must	—
`WERTE_WERDEN_NICHT_NACH_VORGABEN_UEBERMITTELT`	—	—	Must	—
`UEBERSICHT_FEHLT`	—	—	Must	—
`UEBERSICHT_UNPLAUSIBEL`	—	—	Must	—
`AUSGEROLLTE_DEFINITION_FEHLT`	—	—	Must	—
`AUSGEROLLTE_DEFINITION_UNPLAUSIBEL`	—	—	Must	—
reklamationsgrundBemerkung	—	object	May	—
bemerkung1 00050	bemerkung1	string	Must	—
bemerkung2 00060	bemerkung2	string	Must	—
bemerkung3 00070	bemerkung3	string	Must	—
bemerkung4 00080	bemerkung4	string	Must	—
bemerkung5 00090	bemerkung5	string	Must	—
SCHALTZEITDEFINITION [ ]	—	object[]	May	—
schaltzeiten [ ]	—	object[]	May	—
code 00100	code	string	X	—
konfigurationsprodukt 00110	konfigurationsprodukt	string	X	—
WERTE_NACH_TYP2 [ ]	—	object[]	May	—
aenderungsmoeglichkeitKonfiguration 00120	AenderungsmoeglichkeitKonfiguration	Enum AenderungsmoeglichkeitKonfiguration	X	—
`ERFORDERLICH`	—	—	X	—
`NICHT_ERFORDERLICH`	—	—	X	—
messprodukt 00130	messprodukt	string	X	—
aussteller	—	object	May	—
aussteller1 00140	aussteller1	string	X	—
aussteller2 00150	aussteller2	string	X	—
aussteller3 00160	aussteller3	string	X	—
aussteller4 00170	aussteller4	string	X	—
aussteller5 00180	aussteller5	string	X	—
schwellwerte [ ]	—	object[]	May	—
konfigurationsprodukt 00190	konfigurationsprodukt	string	X	—
obererSchwellwert 00200	obererSchwellwert	number (float)	X	—
untererSchwellwert 00210	untererSchwellwert	number (float)	X	—
zertifikatsNutzer	—	object	May	—
zertifikatsNutzer1 00220	zertifikatsNutzer1	string	X	—
zertifikatsNutzer2 00230	zertifikatsNutzer2	string	X	—
zertifikatsNutzer3 00240	zertifikatsNutzer3	string	X	—
zertifikatsNutzer4 00250	zertifikatsNutzer4	string	X	—
zertifikatsNutzer5 00260	zertifikatsNutzer5	string	X	—
zieladresse	—	object	May	—
zieladresse1 00270	zieladresse1	string	X	—
zieladresse2 00280	zieladresse2	string	X	—
zieladresse3 00290	zieladresse3	string	X	—
zieladresse4 00300	zieladresse4	string	X	—
zieladresse5 00310	zieladresse5	string	X	—
transaktionsdaten *	—	object	Must	—
dokumentennummer * 00320	EDIFACT reference from the BGM segment / BGM	string	X	—
nachrichtenReferenzBestellbestaetigung * 00330	Reference number of the message of the affected response to order placement 'order confirmation' / ORDERS RFF+Z42	string	X	—
nachrichtendatum * 00340	Creation date of the EDIFact / DTM+137	string (date-time)	X	—
nachrichtenreferenznummer * 00350	EDIFACT reference from the UNT segment / UTILMD UNT+21	string	Must	—
pruefidentifikator * 00360	Contains the check identifier from the EDIFact communication / RFF+Z13	string	X	—
vorgangsReferenzBestellbestaetigung * 00370	Reference number of the transaction of the affected response to order placement 'order confirmation' / ORDERS RFF+Z43	string	X	—
absender *	—	object	Must	—
rollencodenummer * 00380	Specifies the code value of the market role.	string	X	—
rollencodetyp * 00390	Indicates the type of the code.	Enum Rollencodetyp	X	—
`BDEW`	—	—	X	—
`GS1`	—	—	X	—
`GLN`	—	—	X	—
`DVGW`	—	—	X	—
ansprechpartner	—	object	May	—
eMailAdresse 00400	Email address	string	Must	—
nachname 00410	Surname (family name) of the contact person	string	X	—
rufnummern [ ]	—	object[]	May	—
nummerntyp 00420	Phone number type	Enum Rufnummernart	Must	—
`RUF_ZENTRALE`	—	—	Must	—
`FAX_ZENTRALE`	—	—	Must	—
`SAMMELRUF`	—	—	Must	—
`SAMMELFAX`	—	—	Must	—
`ABTEILUNGRUF`	—	—	Must	—
`ABTEILUNGFAX`	—	—	Must	—
`RUF_DURCHWAHL`	—	—	Must	—
`FAX_DURCHWAHL`	—	—	Must	—
`MOBIL_NUMMER`	—	—	Must	—
rufnummer 00430	rufnummer	string	Must	—
empfaenger *	—	object	Must	—
rollencodenummer * 00440	Specifies the code value of the market role.	string	X	—
rollencodetyp * 00450	Indicates the type of the code.	Enum Rollencodetyp	X	—
`BDEW`	—	—	X	—
`GS1`	—	—	X	—
`GLN`	—	—	X	—
`DVGW`	—	—	X	—

Application handbook (AHB)

Structure (EDIFACT)	Description	Format	17128	Condition
UNH	—	—	Must	—
`0062`00010	Message reference number	—	X	—
`0065 ORDERS`00020	Order placement	—	X	—
`0052 D`00030	Draft version	—	X	—
`0054 09B`00040	Edition 2009 - B	—	X	—
`0051 UN`00050	UN/CEFACT	—	X	—
`0057 1.4b`00060	Version number of the underlying BDEW message description	—	X	—
BGM	—	—	Must	—
`1001 Z76`00070	Complaint about a configuration	—	X	—
`1004`00080	Document number	—	X	—
DTM	—	—	Must	—
`2005 137`00090	Document-/message date/time	—	X	—
`2380`00100	Date or time or time span, value	—	X	[931] [494]
`2379 303`00110	CCYYMMDDHHMMZZZ	—	X	—
SG1.RFF	—	—	Must	—
`1153 Z42`00120	Reference number of the message of the affected response to order placement (order confirmation)	—	X	—
`1154`00130	Reference, identification	—	X	[562]
SG1.RFF	—	—	Must	—
`1153 Z43`00140	Reference number of the transaction of the affected response to order placement (order confirmation)	—	X	—
`1154`00150	Reference, identification	—	X	[563]
SG1.RFF	—	—	Must	—
`1153 Z13`00160	Check identifier	—	X	—
`1154 17128`00170	Complaint about a configuration	—	X	—
SG2.NAD	—	—	Must	—
`3035 MS`00180	Document-/message sender or sender	—	X	—
`3039`00190	MP-ID	—	X	[61]
`3055 9`00200	GS1	—	X	—
`3055 293`00210	DE, BDEW (Bundesverband der Energie- und Wasserwirtschaft e.V.)	—	X	—
SG5.CTA	—	—	Must	—
`3139 IC`00220	Information contact	—	X	—
`3412`00230	Contact	—	X	—
SG5.COM	—	—	Must	—
`3148`00240	Communication address, identification	—	X	(([939] [147]) ∨ ([940] [148])) ∧ [567]
`3155 EM`00250	Electronic mail	—	X	[1P0..1]
`3155 FX`00260	Fax number	—	X	[1P0..1]
`3155 TE`00270	Telephone	—	X	[1P0..1]
`3155 AJ`00280	further telephone	—	X	[1P0..1]
`3155 AL`00290	Mobile phone	—	X	[1P0..1]
SG2.NAD	—	—	Must	—
`3035 MR`00300	Message recipient	—	X	—
`3039`00310	MP-ID	—	X	[61]
`3055 9`00320	GS1	—	X	—
`3055 293`00330	DE, BDEW (Bundesverband der Energie- und Wasserwirtschaft e.V.)	—	X	—
SG29.LIN	—	—	Must	—
`1082`00340	Line item number	—	X	[903]
`1229 Z64`00350	Required product switching time definitions	—	X	—
SG29.PIA	—	—	Must	—
`4347 5`00360	Product identification	—	X	—
`7140`00370	Product code	—	X	[125]
`7143 Z11`00380	Product	—	X	—
SG29.FTX	—	—	Must	—
`4451 Z19`00390	Configuration has no effect	—	X	—
`4451 Z20`00400	Configuration has partial effect	—	X	—
`4451 Z21`00410	Values are not transmitted as specified	—	X	—
`4440`00420	Free text	—	X	—
SG30.CCI	—	—	Must	—
`7059 Z52`00430	Code of the switching time definition	—	X	—
`7037`00440	Code of the switching time definition	—	X	—
SG29.LIN	—	—	Must	—
`1082`00450	Line item number	—	X	[903]
`1229 Z65`00460	Required product power curve definitions	—	X	—
SG29.PIA	—	—	Must	—
`4347 5`00470	Product identification	—	X	—
`7140`00480	Product code	—	X	[126]
`7143 Z11`00490	Product	—	X	—
SG29.FTX	—	—	Must	—
`4451 Z19`00500	Configuration has no effect	—	X	—
`4451 Z20`00510	Configuration has partial effect	—	X	—
`4451 Z21`00520	Values are not transmitted as specified	—	X	—
`4440`00530	Free text	—	X	—
SG30.CCI	—	—	Must	—
`7059 Z53`00540	Code of the power curve definition	—	X	—
`7037`00550	Code of the power curve definition	—	X	—
SG29.LIN	—	—	Must	—
`1082`00560	Line item number	—	X	[903]
`1229 Z66`00570	Required product ad hoc control channel	—	X	—
SG29.PIA	—	—	Must	—
`4347 5`00580	Product identification	—	X	—
`7140`00590	Product code	—	X	[127]
`7143 Z11`00600	Product	—	X	—
SG29.FTX	—	—	Must	—
`4451 Z19`00610	Configuration has no effect	—	X	—
`4451 Z20`00620	Configuration has partial effect	—	X	—
`4451 Z21`00630	Values are not transmitted as specified	—	X	—
`4440`00640	Free text	—	X	—
SG29.LIN	—	—	Must	—
`1082`00650	Line item number	—	X	[903]
`1229 Z67`00660	Required metering product for type 2 values from the backend	—	X	—
SG29.PIA	—	—	Must	—
`4347 5`00670	Product identification	—	X	—
`7140`00680	Product code	—	X	[128]
`7143 Z11`00690	Product	—	X	—
SG29.FTX	—	—	Must	—
`4451 Z19`00700	Configuration has no effect	—	X	—
`4451 Z20`00710	Configuration has partial effect	—	X	—
`4451 Z21`00720	Values are not transmitted as specified	—	X	—
`4440`00730	Free text	—	X	—
SG29.LIN	—	—	Must	—
`1082`00740	Line item number	—	X	[903]
`1229 Z68`00750	Required product configuration permission for values according to type 2 from SMGW	—	X	—
SG29.PIA	—	—	Must	—
`4347 5`00760	Product identification	—	X	—
`7140`00770	Product code	—	X	[129]
`7143 Z11`00780	Product	—	X	—
SG29.FTX	—	—	Must	[564]
`4451 Z17`00790	Destination address URI	—	X	—
`4440`00800	Destination address URI IPv4 for the provision of the values	—	X	[573]
`4440`00810	Destination address URI IPv6 for the provision of the values	—	X	[574]
SG29.FTX	—	—	Must	[564]
`4451 Z24`00820	Issuer	—	X	—
`4440`00830	Certificate issuer	—	X	[967]
SG29.FTX	—	—	Must	[564]
`4451 Z23`00840	Certificate user (subject)	—	X	—
`4440`00850	Certificate user	—	X	[967]
SG29.FTX	—	—	Must	—
`4451 Z19`00860	Configuration has no effect	—	X	—
`4451 Z20`00870	Configuration has partial effect	—	X	—
`4451 Z21`00880	Values are not transmitted as specified	—	X	—
`4440`00890	Free text	—	X	—
SG30.CCI	—	—	Must	—
`7059 Z54`00900	Option to change the configuration in the SMGW	—	X	—
`7037 ZF7`00910	independent modification option required	—	X	—
`7037 ZF8`00920	independent modification option not required	—	X	—
SG30.CCI	—	—	Must	—
`7059 Z60`00930	Thresholds	—	X	—
`7037`00940	Metering product item code	—	X	[141]
`7036`00950	upper threshold	—	X	[906] ∧ [962]
`7036`00960	lower threshold	—	X	[906] ∧ [962]
UNS	—	—	Must	—
`0081 S`00970	Separation of detail and summary section	—	X	—
UNT	—	—	Must	—
`0074`00980	Number of segments in a message	—	X	—
`0062`00990	Message reference number	—	X	—

Conditions of this table

The free text of the 24 conditions referenced by the rows above. All conditions of the message type are listed in the condition index ORDERS.

Marker	Condition
[61]	MP-ID only from division electricity
[125]	Only the configuration products are permitted that are contained in chapter 4.1 „Configuration products switching time definition“ of the code list of configurations.
[126]	Only the configuration products are permitted that are contained in chapter 4.2 „Configuration products power curve definition“ of the code list of configurations.
[127]	Only the configuration products are permitted that are contained in chapter 4.3 „Configuration products ad-hoc control channel“ of the code list of configurations.
[128]	Only the metering products are permitted that are contained in chapter 4.5 „Metering products for values according to type 2 from the backend for LF and NB“ of the code list of configurations.
[129]	Only the metering products are permitted that are contained in chapter 4.4 „Metering products with configuration permission for values according to type 2 from SMGW“ of the code list of configurations.
[141]	Only the metering product position codes are permitted that are contained in chapter 4.7 „Type of values for metering products according to type 2“ of the code list of configurations.
[147]	if the code EM is present in DE3155 in the same COM
[148]	if the code TE / FX / AJ / AL is present in DE3155 in the same COM
[494]	The date stated here must be the point in time at which the document was created, or a point in time before that.
[562]	Note: Value from BGM+Z73 DE1004 of the IFTSTA with which the response to the order placement for the configuration was transmitted
[563]	Note: Transaction number from CNI DE1490 of the IFTSTA with BGM+Z73 with which the response to the order placement of the configuration was transmitted
[564]	Note: For receiving the values according to type 2 from the SMGW.
[567]	Note: Only one piece of information may be transmitted in DE3148
[573]	Note: An URI IPv4 must be specified for the provision of the values.
[574]	Note: An URI IPv6 must be specified for the provision of the values.
[903]	Format: Possible value: 1
[906]	Format: max. 3 decimal places
[931]	Format: ZZZ = +00
[939]	Format: the character string must contain the characters @ and .
[940]	Format: the character string must begin with the character + and may only be followed by digits
[962]	Format: max. 6 digits before the decimal point
[967]	Format: Certificate body in accordance with X509.1, BSI TR-03109-4
[1P0..1]	Note: This is the standard package if no condition applies, e.g. in the COM segment.

Example message

1UNA:+.? '
2UNB+UNOC:3+9903790000002:500+9904446000007:500+{{date}}:{{time}}+M34OM6G0'
3UNH+UNHM2VVAWTY+ORDERS:D:09B:UN:1.4b'
4BGM+Z76+BGMM2I73TJ4'
5DTM+137:202504050200?+00:303'
6RFF+Z42:BGM123456'
7RFF+Z43:1'
8RFF+Z13:17128'
9NAD+MS+9903790000002::293'
10NAD+MR+9904446000007::293'
11LIN+1+Z64'
12PIA+5+9991000000713:Z11'
13FTX+Z19+++freier:Text'
14CCI+Z52++AS1'
15UNS+S'
16UNT+14+UNHM2VVAWTY'
17UNZ+1+M34OM6G0'

Source: 1.edi · 1.json

Download: EDIFACT file · BO4E JSON

Belongs to these role views

The check identifier itself carries no market role. This assignment is derived back from the role views in whose process steps it occurs — affected are LF, NB and MSB.

Role	Party involved	Process	Rulebook	Division	Step
LF	LF	Complaint about a configuration from the LF to MSB	GPKE part 3	Electricity	Step 1
NB	NB	Complaint about a configuration from the NB to MSB	GPKE part 3	Electricity	Step 1
MSB	MSB	Complaint about a configuration from the LF to MSB	GPKE part 3	Electricity	Step 1
MSB	MSB	Complaint about a configuration from the MSB	GPKE part 3	Electricity	Step 1
MSB	MSB	Complaint about a configuration from the NB to MSB	GPKE part 3	Electricity	Step 1
MSB	WMSB	Complaint about a configuration from the MSB	GPKE part 3	Electricity	Step 1

Business classification

Attribute	Value
Use case (AHB)	Complaint about a configuration
AHB	ORDERS AHB
Transmission channel	AS4

This check identifier is used in 3 contexts

Regulatory determination and communication direction depend on the process in which the message is sent. A single entry would be misleading — all placements are therefore listed here.

Process description / rulebook	Process step	Communication	Action
GPKE part 3	Complaint about a configuration from the NB to the MSB	NB → MSB	Complaint about a configuration
GPKE part 3	Complaint about a configuration from the LF to the MSB	LF → MSB	Complaint about a configuration
GPKE part 3	Complaint about a configuration from the MSB	MSB → further MSB	Complaint about a configuration

Transaction and responses

Role of this check identifier: request. Basis: the transaction data carry neither antwortstatus nor antwortstatusCodeliste, and neither the title nor the action of the Prüfi table begins with “response” or “response message”.

Responses: No response of this format version names this check identifier as a reference — neither explicitly in the Prüfi table nor via the step sequence. That does not mean there is none; it means that the sources do not record one.

Check identifiers of the same AHB table: No other check identifier of message type ORDERS has the same row structure in this version.

Notes on this page

An * after a field or group name marks a mandatory field or a mandatory group. The type is beside it; where the value ends up in the EDIFACT segment is shown by the info icon next to the field name.

The status column carries two vocabularies because the manual answers two questions: on a group row, Muss, Soll or Kann states whether the EDIFACT segment must be present; on a field row, X states that this qualifier is used in this check identifier. Both are kept exactly as the source records them.

For this check identifier, the application handbook lists 133 rows. They appear in the order of the handbook, indented by segment: a row without a data element opens a segment, the rows below it are its data elements.

The Condition column names the markers under which the handbook ties a row to a prerequisite; their free text is below the table.

The test data contains one transaction for this check identifier under the message type orders. Each is stored twice — as a EDIFACT message and as a BO4E JSON. That both representations show the same transaction has been recalculated, not assumed: interchange control reference, message reference number, document number, message date, sender and recipient match in all 517 pairs of the format version; check identifier, transaction number and location ID wherever both representations carry them. Not a single attribute contradicts.

Placeholder from the test data set

The test data set carries placeholders instead of valid values: {{date}} and {{time}} in the UNB interchange envelope of every EDIFACT file. The page replaces these on call with the current date and the current time — in the format that applies at the respective position: in the envelope year, month and day as well as hour and minute, two digits each.

<businessKey> stays in place. It is not a time value, and an invented key would look like a valid one.

PI_17126 · Request master data metering location (gas)PI_17129 · Order placement termination of a configuration

ORDERS (46 / 44)

Check identifier 17128 — Complaint about a configuration

Check identifier 17128 · EDIFACT message type ORDERS · Format version 202604

Data structure

Structure (BO4E)	Description	Format	17128	Condition
stammdaten	—	object	May	—
AD_HOC_STEUERKANAL [ ]	—	object[]	May	—
konfigurationsprodukt 00010	konfigurationsprodukt	string	X	—
LEISTUNGSKURVENDEFINITION [ ]	—	object[]	May	—
leistungskurven [ ]	—	object[]	May	—
code 00020	Code of the power curve	string	X	—
konfigurationsprodukt 00030	Configuration product	string	X	—
REKLAMATION [ ]	—	object[]	May	—
reklamationsgrund 00040	This specifies the reason for the complaint about values.	Enum Reklamationsgrund	Must	—
`WERTE_ZU_HOCH`	—	—	Must	—
`WERTE_ZU_NIEDRIG`	—	—	Must	—
`WERTE_FEHLEN`	—	—	Must	—
`KONFIGURATION_WIRKT_NICHT`	—	—	Must	—
`KONFIGURATION_WIRKT_TEILWEISE`	—	—	Must	—
`WERTE_WERDEN_NICHT_NACH_VORGABEN_UEBERMITTELT`	—	—	Must	—
`UEBERSICHT_FEHLT`	—	—	Must	—
`UEBERSICHT_UNPLAUSIBEL`	—	—	Must	—
`AUSGEROLLTE_DEFINITION_FEHLT`	—	—	Must	—
`AUSGEROLLTE_DEFINITION_UNPLAUSIBEL`	—	—	Must	—
reklamationsgrundBemerkung	—	object	May	—
bemerkung1 00050	bemerkung1	string	Must	—
bemerkung2 00060	bemerkung2	string	Must	—
bemerkung3 00070	bemerkung3	string	Must	—
bemerkung4 00080	bemerkung4	string	Must	—
bemerkung5 00090	bemerkung5	string	Must	—
SCHALTZEITDEFINITION [ ]	—	object[]	May	—
schaltzeiten [ ]	—	object[]	May	—
code 00100	code	string	X	—
konfigurationsprodukt 00110	konfigurationsprodukt	string	X	—
WERTE_NACH_TYP2 [ ]	—	object[]	May	—
aenderungsmoeglichkeitKonfiguration 00120	AenderungsmoeglichkeitKonfiguration	Enum AenderungsmoeglichkeitKonfiguration	X	—
`ERFORDERLICH`	—	—	X	—
`NICHT_ERFORDERLICH`	—	—	X	—
messprodukt 00130	messprodukt	string	X	—
aussteller	—	object	May	—
aussteller1 00140	aussteller1	string	X	—
aussteller2 00150	aussteller2	string	X	—
aussteller3 00160	aussteller3	string	X	—
aussteller4 00170	aussteller4	string	X	—
aussteller5 00180	aussteller5	string	X	—
schwellwerte [ ]	—	object[]	May	—
konfigurationsprodukt 00190	konfigurationsprodukt	string	X	—
obererSchwellwert 00200	obererSchwellwert	number (float)	X	—
untererSchwellwert 00210	untererSchwellwert	number (float)	X	—
zertifikatsNutzer	—	object	May	—
zertifikatsNutzer1 00220	zertifikatsNutzer1	string	X	—
zertifikatsNutzer2 00230	zertifikatsNutzer2	string	X	—
zertifikatsNutzer3 00240	zertifikatsNutzer3	string	X	—
zertifikatsNutzer4 00250	zertifikatsNutzer4	string	X	—
zertifikatsNutzer5 00260	zertifikatsNutzer5	string	X	—
zieladresse	—	object	May	—
zieladresse1 00270	zieladresse1	string	X	—
zieladresse2 00280	zieladresse2	string	X	—
zieladresse3 00290	zieladresse3	string	X	—
zieladresse4 00300	zieladresse4	string	X	—
zieladresse5 00310	zieladresse5	string	X	—
transaktionsdaten *	—	object	Must	—
dokumentennummer * 00320	EDIFACT reference from the BGM segment / BGM	string	X	—
nachrichtenReferenzBestellbestaetigung * 00330	Reference number of the message of the affected response to order placement 'order confirmation' / ORDERS RFF+Z42	string	X	—
nachrichtendatum * 00340	Creation date of the EDIFact / DTM+137	string (date-time)	X	—
nachrichtenreferenznummer * 00350	EDIFACT reference from the UNT segment / UTILMD UNT+21	string	Must	—
pruefidentifikator * 00360	Contains the check identifier from the EDIFact communication / RFF+Z13	string	X	—
vorgangsReferenzBestellbestaetigung * 00370	Reference number of the transaction of the affected response to order placement 'order confirmation' / ORDERS RFF+Z43	string	X	—
absender *	—	object	Must	—
rollencodenummer * 00380	Specifies the code value of the market role.	string	X	—
rollencodetyp * 00390	Indicates the type of the code.	Enum Rollencodetyp	X	—
`BDEW`	—	—	X	—
`GS1`	—	—	X	—
`GLN`	—	—	X	—
`DVGW`	—	—	X	—
ansprechpartner	—	object	May	—
eMailAdresse 00400	Email address	string	Must	—
nachname 00410	Surname (family name) of the contact person	string	X	—
rufnummern [ ]	—	object[]	May	—
nummerntyp 00420	Phone number type	Enum Rufnummernart	Must	—
`RUF_ZENTRALE`	—	—	Must	—
`FAX_ZENTRALE`	—	—	Must	—
`SAMMELRUF`	—	—	Must	—
`SAMMELFAX`	—	—	Must	—
`ABTEILUNGRUF`	—	—	Must	—
`ABTEILUNGFAX`	—	—	Must	—
`RUF_DURCHWAHL`	—	—	Must	—
`FAX_DURCHWAHL`	—	—	Must	—
`MOBIL_NUMMER`	—	—	Must	—
rufnummer 00430	rufnummer	string	Must	—
empfaenger *	—	object	Must	—
rollencodenummer * 00440	Specifies the code value of the market role.	string	X	—
rollencodetyp * 00450	Indicates the type of the code.	Enum Rollencodetyp	X	—
`BDEW`	—	—	X	—
`GS1`	—	—	X	—
`GLN`	—	—	X	—
`DVGW`	—	—	X	—

Application handbook (AHB)

Structure (EDIFACT)	Description	Format	17128	Condition
UNH	—	—	Must	—
`0062`00010	Message reference number	—	X	—
`0065 ORDERS`00020	Order placement	—	X	—
`0052 D`00030	Draft version	—	X	—
`0054 09B`00040	Edition 2009 - B	—	X	—
`0051 UN`00050	UN/CEFACT	—	X	—
`0057 1.4b`00060	Version number of the underlying BDEW message description	—	X	—
BGM	—	—	Must	—
`1001 Z76`00070	Complaint about a configuration	—	X	—
`1004`00080	Document number	—	X	—
DTM	—	—	Must	—
`2005 137`00090	Document-/message date/time	—	X	—
`2380`00100	Date or time or time span, value	—	X	[931] [494]
`2379 303`00110	CCYYMMDDHHMMZZZ	—	X	—
SG1.RFF	—	—	Must	—
`1153 Z42`00120	Reference number of the message of the affected response to order placement (order confirmation)	—	X	—
`1154`00130	Reference, identification	—	X	[562]
SG1.RFF	—	—	Must	—
`1153 Z43`00140	Reference number of the transaction of the affected response to order placement (order confirmation)	—	X	—
`1154`00150	Reference, identification	—	X	[563]
SG1.RFF	—	—	Must	—
`1153 Z13`00160	Check identifier	—	X	—
`1154 17128`00170	Complaint about a configuration	—	X	—
SG2.NAD	—	—	Must	—
`3035 MS`00180	Document-/message sender or sender	—	X	—
`3039`00190	MP-ID	—	X	[61]
`3055 9`00200	GS1	—	X	—
`3055 293`00210	DE, BDEW (Bundesverband der Energie- und Wasserwirtschaft e.V.)	—	X	—
SG5.CTA	—	—	Must	—
`3139 IC`00220	Information contact	—	X	—
`3412`00230	Contact	—	X	—
SG5.COM	—	—	Must	—
`3148`00240	Communication address, identification	—	X	(([939] [147]) ∨ ([940] [148])) ∧ [567]
`3155 EM`00250	Electronic mail	—	X	[1P0..1]
`3155 FX`00260	Fax number	—	X	[1P0..1]
`3155 TE`00270	Telephone	—	X	[1P0..1]
`3155 AJ`00280	further telephone	—	X	[1P0..1]
`3155 AL`00290	Mobile phone	—	X	[1P0..1]
SG2.NAD	—	—	Must	—
`3035 MR`00300	Message recipient	—	X	—
`3039`00310	MP-ID	—	X	[61]
`3055 9`00320	GS1	—	X	—
`3055 293`00330	DE, BDEW (Bundesverband der Energie- und Wasserwirtschaft e.V.)	—	X	—
SG29.LIN	—	—	Must	—
`1082`00340	Line item number	—	X	[903]
`1229 Z64`00350	Required product switching time definitions	—	X	—
SG29.PIA	—	—	Must	—
`4347 5`00360	Product identification	—	X	—
`7140`00370	Product code	—	X	[125]
`7143 Z11`00380	Product	—	X	—
SG29.FTX	—	—	Must	—
`4451 Z19`00390	Configuration has no effect	—	X	—
`4451 Z20`00400	Configuration has partial effect	—	X	—
`4451 Z21`00410	Values are not transmitted as specified	—	X	—
`4440`00420	Free text	—	X	—
SG30.CCI	—	—	Must	—
`7059 Z52`00430	Code of the switching time definition	—	X	—
`7037`00440	Code of the switching time definition	—	X	—
SG29.LIN	—	—	Must	—
`1082`00450	Line item number	—	X	[903]
`1229 Z65`00460	Required product power curve definitions	—	X	—
SG29.PIA	—	—	Must	—
`4347 5`00470	Product identification	—	X	—
`7140`00480	Product code	—	X	[126]
`7143 Z11`00490	Product	—	X	—
SG29.FTX	—	—	Must	—
`4451 Z19`00500	Configuration has no effect	—	X	—
`4451 Z20`00510	Configuration has partial effect	—	X	—
`4451 Z21`00520	Values are not transmitted as specified	—	X	—
`4440`00530	Free text	—	X	—
SG30.CCI	—	—	Must	—
`7059 Z53`00540	Code of the power curve definition	—	X	—
`7037`00550	Code of the power curve definition	—	X	—
SG29.LIN	—	—	Must	—
`1082`00560	Line item number	—	X	[903]
`1229 Z66`00570	Required product ad hoc control channel	—	X	—
SG29.PIA	—	—	Must	—
`4347 5`00580	Product identification	—	X	—
`7140`00590	Product code	—	X	[127]
`7143 Z11`00600	Product	—	X	—
SG29.FTX	—	—	Must	—
`4451 Z19`00610	Configuration has no effect	—	X	—
`4451 Z20`00620	Configuration has partial effect	—	X	—
`4451 Z21`00630	Values are not transmitted as specified	—	X	—
`4440`00640	Free text	—	X	—
SG29.LIN	—	—	Must	—
`1082`00650	Line item number	—	X	[903]
`1229 Z67`00660	Required metering product for type 2 values from the backend	—	X	—
SG29.PIA	—	—	Must	—
`4347 5`00670	Product identification	—	X	—
`7140`00680	Product code	—	X	[128]
`7143 Z11`00690	Product	—	X	—
SG29.FTX	—	—	Must	—
`4451 Z19`00700	Configuration has no effect	—	X	—
`4451 Z20`00710	Configuration has partial effect	—	X	—
`4451 Z21`00720	Values are not transmitted as specified	—	X	—
`4440`00730	Free text	—	X	—
SG29.LIN	—	—	Must	—
`1082`00740	Line item number	—	X	[903]
`1229 Z68`00750	Required product configuration permission for values according to type 2 from SMGW	—	X	—
SG29.PIA	—	—	Must	—
`4347 5`00760	Product identification	—	X	—
`7140`00770	Product code	—	X	[129]
`7143 Z11`00780	Product	—	X	—
SG29.FTX	—	—	Must	[564]
`4451 Z17`00790	Destination address URI	—	X	—
`4440`00800	Destination address URI IPv4 for the provision of the values	—	X	[573]
`4440`00810	Destination address URI IPv6 for the provision of the values	—	X	[574]
SG29.FTX	—	—	Must	[564]
`4451 Z24`00820	Issuer	—	X	—
`4440`00830	Certificate issuer	—	X	[967]
SG29.FTX	—	—	Must	[564]
`4451 Z23`00840	Certificate user (subject)	—	X	—
`4440`00850	Certificate user	—	X	[967]
SG29.FTX	—	—	Must	—
`4451 Z19`00860	Configuration has no effect	—	X	—
`4451 Z20`00870	Configuration has partial effect	—	X	—
`4451 Z21`00880	Values are not transmitted as specified	—	X	—
`4440`00890	Free text	—	X	—
SG30.CCI	—	—	Must	—
`7059 Z54`00900	Option to change the configuration in the SMGW	—	X	—
`7037 ZF7`00910	independent modification option required	—	X	—
`7037 ZF8`00920	independent modification option not required	—	X	—
SG30.CCI	—	—	Must	—
`7059 Z60`00930	Thresholds	—	X	—
`7037`00940	Metering product item code	—	X	[141]
`7036`00950	upper threshold	—	X	[906] ∧ [962]
`7036`00960	lower threshold	—	X	[906] ∧ [962]
UNS	—	—	Must	—
`0081 S`00970	Separation of detail and summary section	—	X	—
UNT	—	—	Must	—
`0074`00980	Number of segments in a message	—	X	—
`0062`00990	Message reference number	—	X	—

Conditions of this table

The free text of the 24 conditions referenced by the rows above. All conditions of the message type are listed in the condition index ORDERS.

Marker	Condition
[61]	MP-ID only from division electricity
[125]	Only the configuration products are permitted that are contained in chapter 4.1 „Configuration products switching time definition“ of the code list of configurations.
[126]	Only the configuration products are permitted that are contained in chapter 4.2 „Configuration products power curve definition“ of the code list of configurations.
[127]	Only the configuration products are permitted that are contained in chapter 4.3 „Configuration products ad-hoc control channel“ of the code list of configurations.
[128]	Only the metering products are permitted that are contained in chapter 4.5 „Metering products for values according to type 2 from the backend for LF and NB“ of the code list of configurations.
[129]	Only the metering products are permitted that are contained in chapter 4.4 „Metering products with configuration permission for values according to type 2 from SMGW“ of the code list of configurations.
[141]	Only the metering product position codes are permitted that are contained in chapter 4.7 „Type of values for metering products according to type 2“ of the code list of configurations.
[147]	if the code EM is present in DE3155 in the same COM
[148]	if the code TE / FX / AJ / AL is present in DE3155 in the same COM
[494]	The date stated here must be the point in time at which the document was created, or a point in time before that.
[562]	Note: Value from BGM+Z73 DE1004 of the IFTSTA with which the response to the order placement for the configuration was transmitted
[563]	Note: Transaction number from CNI DE1490 of the IFTSTA with BGM+Z73 with which the response to the order placement of the configuration was transmitted
[564]	Note: For receiving the values according to type 2 from the SMGW.
[567]	Note: Only one piece of information may be transmitted in DE3148
[573]	Note: An URI IPv4 must be specified for the provision of the values.
[574]	Note: An URI IPv6 must be specified for the provision of the values.
[903]	Format: Possible value: 1
[906]	Format: max. 3 decimal places
[931]	Format: ZZZ = +00
[939]	Format: the character string must contain the characters @ and .
[940]	Format: the character string must begin with the character + and may only be followed by digits
[962]	Format: max. 6 digits before the decimal point
[967]	Format: Certificate body in accordance with X509.1, BSI TR-03109-4
[1P0..1]	Note: This is the standard package if no condition applies, e.g. in the COM segment.

Example message

1UNA:+.? '
2UNB+UNOC:3+9903790000002:500+9904446000007:500+{{date}}:{{time}}+M34OM6G0'
3UNH+UNHM2VVAWTY+ORDERS:D:09B:UN:1.4b'
4BGM+Z76+BGMM2I73TJ4'
5DTM+137:202504050200?+00:303'
6RFF+Z42:BGM123456'
7RFF+Z43:1'
8RFF+Z13:17128'
9NAD+MS+9903790000002::293'
10NAD+MR+9904446000007::293'
11LIN+1+Z64'
12PIA+5+9991000000713:Z11'
13FTX+Z19+++freier:Text'
14CCI+Z52++AS1'
15UNS+S'
16UNT+14+UNHM2VVAWTY'
17UNZ+1+M34OM6G0'

Source: 1.edi · 1.json

Download: EDIFACT file · BO4E JSON

Belongs to these role views

The check identifier itself carries no market role. This assignment is derived back from the role views in whose process steps it occurs — affected are LF, NB and MSB.

Role	Party involved	Process	Rulebook	Division	Step
LF	LF	Complaint about a configuration from the LF to MSB	GPKE part 3	Electricity	Step 1
NB	NB	Complaint about a configuration from the NB to MSB	GPKE part 3	Electricity	Step 1
MSB	MSB	Complaint about a configuration from the LF to MSB	GPKE part 3	Electricity	Step 1
MSB	MSB	Complaint about a configuration from the MSB	GPKE part 3	Electricity	Step 1
MSB	MSB	Complaint about a configuration from the NB to MSB	GPKE part 3	Electricity	Step 1
MSB	WMSB	Complaint about a configuration from the MSB	GPKE part 3	Electricity	Step 1

Business classification

Attribute	Value
Use case (AHB)	Complaint about a configuration
AHB	ORDERS AHB
Transmission channel	AS4

This check identifier is used in 3 contexts

Regulatory determination and communication direction depend on the process in which the message is sent. A single entry would be misleading — all placements are therefore listed here.

Process description / rulebook	Process step	Communication	Action
GPKE part 3	Complaint about a configuration from the NB to the MSB	NB → MSB	Complaint about a configuration
GPKE part 3	Complaint about a configuration from the LF to the MSB	LF → MSB	Complaint about a configuration
GPKE part 3	Complaint about a configuration from the MSB	MSB → further MSB	Complaint about a configuration

Transaction and responses

Check identifiers of the same AHB table: No other check identifier of message type ORDERS has the same row structure in this version.

Notes on this page

The Condition column names the markers under which the handbook ties a row to a prerequisite; their free text is below the table.

Placeholder from the test data set

<businessKey> stays in place. It is not a time value, and an invented key would look like a valid one.

PI_17126 · Request master data metering location (gas)PI_17129 · Order placement termination of a configuration

Feedback on the documentation

Feedback on the documentation

Check identifier 17128 — Complaint about a configuration

Data structure

Application handbook (AHB)

Conditions of this table

Example message

Belongs to these role views

Business classification

Transaction and responses

Check identifier 17128 — Complaint about a configuration

Data structure

Application handbook (AHB)

Conditions of this table

Example message

Belongs to these role views

Business classification

Transaction and responses